Views: 2718

Resin transparency paper

Transparency, before you put in your transparency, you will need to pour enough resin to coat the bottom. I measure my pendant and put a very very small dot with my marker as a guide. Around 1/8 gives a nice magnification of your transparency. I took a several photos at my families graveyard where my mother is buried. Item model number, iTF131920, number of Items 20, size 13x19, sheet Size 13 x 19 inches. After you have decided on a mold, you will have to measure the inside of the mold you choose. Do what I say, not what. Then take an emery board and file off the rough edges that are on the back. Be sure to print on the correct side of the transparency. When I cut out my transparencies, I take them to a window where there is really bright light. Free Pickup, fREE Pickup Today, brand, posterazzi. It took time through trial and error to get as far as I am now. See more prices, color, yellow, gray Silver Pink Brown Orange Purple Gold Beige Other Off-White Bronze Assorted See more colors Retailer m Rakuten Kobo Inc.

I usually push it down where the resin comes up over the top international of the transparency and then I center. And want to work with years transparencies. You will need to know the measurements for your transparency. Optional big emery board nail file.

And that way you do not have to clifton hw maloney sand the back edges. When you are ready to print out on your transparencies. You have gone to printing preferences and change the features. Mold, it will not be the shinny slick side. Mix up your resin according to the instructions that came with your Super Clear Resin. So you do not waste any of the transparency sheets. It will be the textured side that you print.

I then pour more resin to the top of that and center it once again.You can pre-order the e-book at Etsy or Craftsy.